X20 analog input module x20ai4622. with 4 inputs, ±10 V or 0 to 20 mA / 4 to 20 mA, 13-bit.

x20ai4622 with converter resolution, configurable input filter

x20 ai 4622 accessories with: X20BM11(X20 bus module, 24 VDC keyed, internal I/O power supply

connected through)

X20BM15 (X20 bus module, with node number switch, 24 VDC keyed, internal I/O power supply

connected through)

Terminal blocks: X20TB12 (X20 terminal block, 12-pin, 24 VDC keyed)

Parameters:

B&R ID code is 0x1BAA

Status indicators is I/O function per channel, operating state, module status

Bus is 0.01 W

Internal I/O is 1.1 W  

Input is ±10 V or 0 to 20 mA / 4 to 20 mA, via different terminal connections

Input type is Differential input is

Voltage is ±12-bit

Current is 12-bit

Conversion time is 400 μs for all inputs 

Voltage is 20 MΩ 

Current is <400 Ω

Voltage is Max. ±30 V

Current is Max. ±50 mA 

Input filter is Third-order low-pass filter / Cutoff frequency 1 kHz  

Gain is 0 to 20 mA = 0.08% / 4 to 20 mA = 0.1% 

Offset is 0 to 20 mA = 0.03% / 4 to 20 mA = 0.0375%  

Insulation voltage between channel and bus is 500 Veff 

Electrical isolation is Channel isolated from bus  

Horizontal mounting orientation is -25 to 60°C

Vertical mounting orientation is -25 to 50°C 

Operation is 5 to 95%, non-condensing

Storage is 5 ~ 95%, non-condensing

Transport 5~ 95%, non-condensing 

Order 1 x terminal block X20 TB 12 separately.

Order 1 x bus module X20 BM 11 separately.

Pitch is 12.5+0.2mm

Pls contact with Vivi for more informations of this part (sh_plc@163.com)